The KAMEN KomfortPell pellet boiler is heating that meets your needs! An innovative built-in burner and modern controller ensure minimal boiler maintenance interval. The boiler is equipped with a secondary horizontal smoke conversion system, a well-insulated body, a large heat exchanger and other technological solutions that allowed to achieve 93% efficiency. The boiler is equipped with a stainless steel Kamen Fenix burner that stands out with an advanced combustion chamber design and an optimized air supply system, which ensures even pellet combustion and significantly reduces the amount of pollutant emissions. Extremely high thermal efficiency guarantees maximum fuel utilization and real financial benefits to the user. The boiler body is made of 6 mm thick 265 GH boiler steel. All doors are made of steel and sealed with an ecological sealant resistant to high temperatures. The upper doors are intended for boiler cleaning. In order to reduce heat loss, the boiler is insulated with mineral wool and covered with powder-coated steel sheet. The boiler fuel tank can be on the right or left side. The innovative Fenix burner allows the boiler to be used almost maintenance-free. The entire boiler operation is controlled by an electronic controller created according to the latest technologies. The Fenix burner has automatic ignition and the boiler heats the rooms according to heating needs. When the rooms warm up, the boiler shuts down automatically, and if the temperature in the rooms drops below the set temperature, the burner will ignite automatically (if a room thermostat is installed). The Fenix burner stands out with a wide selection of functions in the electronic controller. In addition, this burner has a "Full clean" function. "Full clean" function: this is an additional automatic ash removal mechanically. The boiler supply and return pipe can be installed on the left or right side of the boiler (ordered separately).